|
| 24VDC Power Distribution and Current Monitor |
|
 |
|
| This board has two switched and fused relay buses that are controlled with 5V TTL signals. It also features a onboard 1A 5V switching supply, 50A current monitor, and status LEDs. |
|
|
|
|
| TE-096-000 |
$129.00
In Stock! |
|
|
|
| 4PST Switch Toggle 25A |
|
 |
|
| This is a Four Pole Single Throw (4PST) Power switch. The contacts are rated at 25Amps |
|
|
|
|
| TE-083-000 |
$11.40
In Stock! |
|
|
|
| 6P DPDT Slide Switch - 2pcs |
|
 |
|
| This is a two-position switch 2 pole, on/off switch. Handles up to a 4A @ 6V. This switch works well in low power applications. Use in a variety of Tamiya Construction or Robotics projects. |
|
|
|
|
| TAM-041-000 |
$1.75
In Stock! |
|
|
|
| 6P DPDT Toggle Switch - On/off/on |
|
 |
|
| Set this Tamiya 2 pole on/off/on DPDT for a variety of functions. Handles up to 5A. Use with Tamiya Construction and Robotics projects |
|
|
|
|
| TAM-042-000 |
$4.70
In Stock! |
|
|
|
| 6P DPDT Toggle Switch - Self-Neutral Function |
|
 |
|
| Similar to the 6P Toggle Switch (TAM-042-000) but with a self-centering function that causes the control to go back to center when released. Handles up to 5A. |
|
|
|
|
| TAM-043-000 |
$4.70
In Stock! |
|
|
|
| 7 Chan High Cur TTL Driver with 1 Power 5V Relay |
|
 |
|
| This is a High current driver that will take the 5V TTL signal from your OOPic, Basic Stamp, etc and drive 1 relay. 6 other channels are left open for other applications. |
|
|
|
|
| TE-010-105 |
$14.95
Backorder |
|
|
|
| 7 Chan High Cur TTL Driver with 2 Power 5V Relays |
|
 |
|
| This is a High current driver that will take the 5V TTL signal from your OOPic, Basic Stamp, etc and drive any all of the 2 relays. 5 other channels are left open for other applications. It includes status LEDs for each input. |
|
|
|
|
| TE-010-205 |
$21.95
In Stock! |
|
|
|
| 7 Chan High Cur TTL Driver with 4 Power 12V Relays |
|
 |
|
| This is a High current driver that will take the 5V TTL signal from your OOPic, Basic Stamp, etc and drive any all of the 4 relays. 3 other channels are left open for other applications. It includes status LEDs for each input. |
|
|
|
|
| TE-010-412 |
$28.95
In Stock! |
|
|
|
| 7 Chan High Cur TTL Driver with 4 Power 5V Relays |
|
|
|
| This is a High current driver that will take the 5V TTL signal from your OOPic, Basic Stamp, etc and drive any all of the 4 relays. 3 other channels are left open for other applications. It includes status LEDs for each input. |
|
|
|
|
| TE-010-405 |
$28.95
In Stock! |
|
|
|
| Analog 2-Axis Joystick |
|
 |
|
| This a high quality 2 axis joystick with a rubber boot. Spring return to center (springs can be removed). Each Axis is attached to a 5k linear potentiometer. |
|
|
|
|
| TE-128-000 |
$29.95
In Stock! |
|
|
|
| BattleSwitch Radio Controlled 10A Relay |
|
 |
|
| BattleSwitch is a relay switch that you toggle via hobby radio control gear. You can use BattleSwitch to quickly and easily control glow plugs, BattleBot weaponry and more. Made by Dimension Engineering. |
|
|
|
|
| TE-094-000 |
$24.99
In Stock! |
|
|
|
| DPDT and SPDT Relay with TTL Driver |
|
 |
|
| This is a Relay circuit driven by TTL singles. A DPDT and SPDT relay are connected to allow you to dive a load in forward/off/reverse. |
|
|
|
|
| TE-010-502 |
$24.90
In Stock! |
|
|
|
| Four-Channel Remote Control |
|
 |
|
| This is a simple wired remote control that can be used to control four(4) low current motors using two dual axis joy sticks. |
|
|
|
|
| TAM-022-004 |
$17.50 $15.30
In Stock! |
|
|
|
| I/O Relay Board |
|
 |
|
| The I/O Relay Output Board can be connected to I/O port of the USB I/O 24modules to provide 8 Isolated relay contact outputs suitable for a variety of loads. Made by Elexol. |
|
|
|
|
| TE-049-000 |
$58.00
In Stock! |
|
|
|
| I/O Switch and LED Board |
|
 |
|
| The I/O Connector Board can be used to provide 8 switch/push buttons with LED indicators showing the status of the I/O pin. Made by Elexol. |
|
|
|
|
| TE-067-000 |
$38.50
In Stock! |
|
|
|
| IO 24 ULN2803 Switch Board |
|
 |
|
| The I/O 24 ULN2803 Switch Board is a very useful accessory board that allows much higher voltage and current devices to be interfaced to the low level logic provided by the Elexol I/O 24 modules. Made by Elexol. |
|
|
|
|
| TE-101-000 |
$28.95
In Stock! |
|
|
|
|
|
| SPDT Switch |
|
 |
|
| This is a Single Pole Double Throw two position switch. |
|
|
|
|
| TE-031-000 |
$1.99
In Stock! |
|
|
|
| Two-Channel Remote Control |
|
 |
|
| This is a simple wired remote control that can be used to control your low current motors using two joy sticks. |
|
|
|
|
| TAM-022-002 |
$13.50 $11.80
In Stock! |
|
| |
